Powder Cop Die - 3D Printed, works with any progressive press

Description

Reloading3D
You can see a video of our Powder Cop Die in action here:
https://youtu.be/AOv3rSClu7I
Our Powder Cop Die is perfect for your progressive reloading press. Just install our 3D printed die after the powder drop station to automatically check your dropped charges.  Our Die utilizes an internal stem that will move up when there is powder in your case when the die is properly set. If there is no powder charge in the case then the stem will not rise.
The stem is easily adjustable and you can set it to react to any powder in the case or if you prefer to set it with your normal powder drop, it can re-act only to over charges.  Any movement by the included Safety Orange stem cap is sure to catch your eye.
You will receive the following with your order:
- 3D printed die in the color of your choice (thread pitch
7/8"-14)
- 3D printed lock ring (thread pitch
7/8"-14)
- Internal stem with 2 nuts
- Stem topper in Safety Orange (unless you request a different color)